Loading ...
Loading ...
Loading ...
EEEETROUBLESHOOTING
Review this chaff to find do-it-yourself solutions for minor performance problems.
fore servicing or cleaning the unit. Failure to do so could result
I injury.
Cleaner won't _larL
Poorlob of did
plck-up.
Cleaner starts but
cuts off.
Unplugged at wall o_iet 1.
_ripued c rcuit breaker/blown fluse at 2.
househOld service pohei
Loose nose elec+rical conneatlons, 3.
tripped ovedoaa protector 4.
in _OWER MATE TM
Cleaner picks up movable
rugs -or- POWER-MATE TM
pushes too haml.
1. Fuii or c!ogged dust bog
2. Cio_gea aidow passagos
3, Diffymatotso_e-ytlitet.
4. W_ong pie height setting.
5, Ooe_ suction control,
6. Hole in hose
7. Worn POWER-MATE lm brushes,
& Worn or broken belt
9, Dirty Brush or bnjs_ SUpportS
10. Canister hood ODen
t. Hose or hood eiec:rtcal connections,
2. Tdbped over!dad protec.tol
in POWER-MATE TM
Plug in frmly push On/Off switch to ON
Reset cltcut breaker or replace fuse
Reconnect hose enos, (DaQe 7)
Cean brush and brush supports, then
reset, (pages t6- T_)
_. Cnar*ge bag, (page 14)
2. Cearolrltowpasseges, dpoge 13%
& Cean filter, (page 15),
4. Adiust se_ting, (page 1I),
8, Adjust conhol, (page 12)
6, Replace hose
7_ Change brushes, (page !8)
8 & 9. See BELT CI IANGING AND BRUSH
CLEAN NG, (pages !6, 12)
lO, Close and latch hood
3. Tp:#ped overload protector B.
it1 COrll_ef
POWER-MATETmwlIInot 1. POW-=%MATETMOOr_neetiOnS 1, Plug [n tltmly, (page 6_.
run when attached, unpluggect
2. Worn or b_oken belt 2.&3. SeeB'=LTCHANGINGANDBRUSH
3, Ddybrushor brushsupports CLEANING,[pages 16, _7),
4. Trppedoverloadprotector 4, Checkbrushoreatore×ces_velnt build-
in POW£f_-MA_E TM up orjammlng Cteon brush and brush
suppaffs, then rese ÷, (pages 16-18),
Constant green light on 1. Dirt passage is clogged, !. Check for clogs I_ air passages, (page 13).
dirt sensor. 2. Lenses are dirh! 2. Clean lenses, (_age t_,
Any, _me, or aU red lights 1. Dirt passage is clogged, 1. Check for dogs h air passages, (page 13)
in dirt sensor bum and
never turn green,
No green or red t Switch is not in CARP_ position, 1. Move switch to CARPET posiion, (page B),
diffsensorllghts. 2. NoDowertosenserboord 2, TaketoyournearesffSearsServioeC'enTef
Peffotrr_n¢_ i_:lica_r 1. Fuli o ciogge_ dust bog 1, Change bag, (page 14_,
mred. 2. DIdy motor so_etyfllter. 2. Clean tiltel, (page 15)
3. Blockedaiffiowpa_sage, & Clearb!oc_agefromairrlowpassage,(/:_ge 13).
4. Ce,ffain attachment fools, 4, This is normal Ught should go off when
toois removed,
1. Wrong Olte heght setting, t Ad_usi se_tng, (page 1!)
2, Suction too _rong, 2 Open suctlo_ control, (page 12)
Ughtwo_'twork, __{ 1, _Jrnedoutbuib, 1. Changebutb,(uage16)
| t, g}rly power cord. L Clean the power co_d,C¢_d w_n_ rewind,
2, Cord lammed _, Pull OUt cord and rewirld.
Cleaner leaves merk_ 1, Wrong vacuuming pa/_ern, 1 See VACUUMING TIPS,(page 9),
OrlO_ltp@t.
Check connections, reconnect hose ends, (page 7)
Remove ohy ffems that may be caught or
jammed, then reset, f cleaner s_arts end s-ops again,
cean brush and brush suppcrls, then r(_et,
(pages 1648).
Change dust bag, clear airflow blockage,
(pago _3) Walt 20 minutes for motor to
cool and automatical;y reset,
!9
Loading ...