Loading ...
Loading ...
Loading ...
AERATION
To ensure the ame is clean and blue, that is NO
yellow tip to ame or sooting, adjust the primary
air disk. The primary air disk can be adjusted
clockwise/counter clockwise by hand. The ideal
positioning of the aeration disk when measured from
the venturi tube is;
RB2 - INNER # 1 - 2mm open
- OUTER # 4 - 3mm open
RB3 - INNER # 1 - 7mm open
- 1st MIDDLE# 2 - 7mm open
- OUTER # 4 - 3mm open
RB4 - ALL BURNER RINGS 3mm open
6
Problem Possible Reason Solution
Burner will not ignite Valve on gas bottle closed. Open valve on gas bottle.
Control knob is closed. Turn knob to high when lighting.
Food is not cooking Burner has gone out. Check that the gas bottle is not
or is taking too long empty and re-ignite burner.
LIGHTING PROCEDURE
Burner Operation &
Ignition System Check
1. Turn inner gas valve on.
2. Open gas valve and light immediately with long
BBQ match following sequence in step 3.
3. Light the burners in order:
Without pot.
RB2 RB3 RB4
Inner # 1 Inner # 1 Inner # 1
Outer # 4 1st Middle # 2 1st Middle # 2
Outer # 4 2nd Middle # 3
Outer # 4
All of these will need to be lit using a long
BBQ match.
With pot.
RB2 RB3 RB4
Outer # 4 Outer # 4 Outer # 4
Inner # 1 1st Middle # 2 2nd Middle # 3
Inner # 1 1st Middle # 2
Inner # 1
The outer ring #4 will need to be lit using a long
BBQ match, all other rings will cross light if lit in the
above sequence.
4. Once lit adjust the primary air disk to provide a
clean blue ame.
5. Place cooking pot onto ring burner.
After Use
Turn the gas cylinder valve off and wait for the ame
to go out. Then turn the appliance gas valve off.
RB2
4
1
Inner # 1
Outer # 4
RB3
4
2
1
Outer # 4
Inner # 1
1st Middle # 2
RB4
4
2
1
3
Outer # 4
1st Middle # 2
Inner # 1
2nd Middle # 3
Gas valve and burner ring matching.
Loading ...
Loading ...