Loading ...
Loading ...
Loading ...
Use
71
EN
4. Turn and hold both knobs anti-clockwise
again.
The rear left and rear right cooking zone
displays will indicate the power levels “4.”
and “8”.
5. Release the knobs.
6. Turn and hold both knobs anti-clockwise
again.
The rear left and rear right cooking zone
displays will indicate the power levels “3.”
and “7”.
7. Release the knobs.
Possible cooking zone combinations
Control lock
1. With all cooking zones off,
simultaneously turn counterclockwise
the two knobs - among those for
cooking control - for the front and rear
left cooking zones (position A).
2. Keep them turned until the symbols
appear on the display.
3. Release the knobs.
In order to remove the control lock repeat
the same operations described previously.
Error codes
If the display shows one of the following
error codes , , contact Technical
Assistance.
After having released the knobs at
the required power level, wait until
the displays turn off.
The power level can be changed
again up to 4 minutes after the
displays have turned off (without
having to disconnect the appliance
from the power supply).
The last power setting will remain
selected even in the event of a
power failure.
Zone 1 Zone 2 Zone 3 Zone 4 Zone 5
9 99P -
999-7
9 9887
9 9P7-
99797
999P -
99 - P9
997-9
99788
99878
99 - 7P
The controls lock is a device that
protects the appliance from
accidental or inappropriate use.
If the knobs have been kept turned
to the A position for more than
30 seconds a fault message is
displayed
After a prolonged period of
interruption to the power supply,
the control lock will be
deactivated. If this is the case, turn
it back on as described above.
Loading ...
Loading ...
Loading ...