Loading ...
Loading ...
Loading ...
_The operation of any tiller ban result in foreign objects thrown into the
'[,'_,jeyes, which can result in severe eye damage. Always wear safety glasses
_or eye shields before starting your tiller and while tilling. We recommend a
wide vision safety mask over spectacles or standard safety glasses,
HOW TO USE YOUR TILLER
STOPPING
TINES
• Release forward fine control to stop for-
ward movement,
ENGINE
i = Move throttle control to "STOP" position.
!
_ Never use choke to stop engine,
Forward Tine Control "OFF (UP) Position
Forward
Position
_... Choke
Control
. hrottle
Control
TINE OPERATION
_FORWARD
i_o Squeeze forward line control to handle.
TILLING
The speed and depth of tilling is regulated
iby the position of the depth stake and
i ,vheel height.
!The depth stake should always be below
it he wheels for digging. It serves as a
,rake to slow the tiller's forward motion to
'i nable the tines to penetrate the ground_
_lso, the more the depth stake ]stowered
_to the ground the deeper the tines will
1 .
tEPTH STAKE
djust depth stake by removing tile hair-
in clip and clevis pin. Change depth
take to desired position. Replace the cte-
s pin and hairpin ciip_ , '_
For normal tiIting, set depth stake'at the
second or third hole from the top.
WHEELS
Adjust wheels by removing the hairpin clip
and clevis pin. Change wheel position.
Replace the hairpin clip and clevis pin.
o For normal tilling, set wheels at the sec-
ond or third hole from the top_
Wheel _
pth Stake
Stake Spring andClevisPin
TRANSPORTING YOUR TILLER
,_.CAUTION: Before lifting or transport-
ing, allow tiller engine and muffler to cool.
Disconnect spark plug wire. Drain gaso,-
line from fuel tank_
AROUND THE YARD
o Tip depth stake forward until It is held by
the stake spring°
o Push tiller handles down, raising tines
off the ground°
o Push or puil tiller to desired location°
AROUND TOWN
o Disconnect spark plug wire,
. Drain fue_ tank.
o Transport in upright position to prevent
oil leakage.
BEFORE STARTING ENGINE
IMPORTANT: Be very careful not to allow
dirt to enter the engine when checking or
adding oi! or fuel. Use clean oil and fuel
and store in approved, clean, covered
containers. Use clean fill funnels.
FILL ENGINE WITH OIL
• Remove hang tag from engine.
• With engine level, remove engine oil
filler plug,
• Fill engine with oil to point of overflow-
ing, For approximate capacity see
"PRODUCT SPECIFICATIONS on
page 4 of this manual,
8
Loading ...
Loading ...
Loading ...