Loading ...
Loading ...
Loading ...
OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH:
Heated dry Heated dry: For best Turn OFE When loads contain plastic dinnerware that maybe Light,
drying resu!ts, dry dishes sensitive to high temperatures I Auto C!ean P!us ..........
t hheat: This option with the use of rinse aid Wi!l provide the best
drying performance.
Tosanitize your dishes and
glassware in accordance
with NSF/ANSI Standard
184 for Residential
Dishwashers.
Raises the water temperature in the final rinse to
approximately 154°F (68°C). This high temperature rinse
sanitizes your dishes and glassware in accordance with
NSF/ANSI Standard 184 for Residential Dishwashers.
Certified residential dishwashers are not intended for
licensed food establishments.
Heavy, Normal, Light, or
Auto Clean Plus
The Sanitize option adds heat and time to the cycle.
To run .youi dishwasher at De!ays the start oia Cyc!e up to6 hours Ai! CYcles
aater t me or dur ng off
:_ j_ ,_ ., - Select a wash cycle and options Press Delay. Press START/
Peak nours. RESUME. Close the door firmly within 3 seconds. For fully ...........................................
integrated m0dels ((contro!s ontop 0f c0nso!e),
Control Lock To avoid unintended use of
your dishwasher, or cycle
and option changes during
a cycle.
To turn on Lock, press and hold Heated Dry for at least
3 seconds.
To turn off Lock, press and hold Heated Dry for at least
3 seconds.
When Control Lock is lit, all buttons are disabled. If you press
any pad while your dishwasher is locked, the light flashes
5 times. The dishwasher door can be opened while the
controls are locked.
Anytime
IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the
cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the cycle
will automatically compensate by adding time, heat and water as needed.
CONTROL PURPOSE COMMENTS
To start or resume a If the do0r is opened during a CYcle or the power is interrupted, a!l lights Will flash to indicate a
wash cycle suspended CYC!e.The cyc!e will not resume until the door is c!osed, and the START/RESUME
button is pushed _
To cancel wash
cycle
Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let the dishwasher
drain completely.
_cancel
drain
ci_n_ Tofollow the The !tclean,i indicator glows when a cycle is finished.
_,,!,i_ progress:and status If you select the sanitize option;when the Sanitize cYc!e is finished, the Sanitized indicat0r g!ows:
oTyour a snwasner
If your dishwasher did not properly sanitize your dishes, the light will be blinking. This can happen
wash dry clean cYCle if the cycle is interrupted, or the water could not be heated to the required temperatu[el The clean
and sanitize !ights go Offwhen the d0or has been opened for rnore than 30 seconds or the
CANCEL key is pressed.
The !!Washing,' indicator glows at the start of the first fill of any cYCle (except Rinse On!y)and
remains on until the end of the main wash cycle.
The "Drying" indicator glows during the drying portion of each cycle (except Rinse Only).
Loading ...
Loading ...
Loading ...