Loading ...
Loading ...
Loading ...
Installation Instructions
[] CONNECT THE TUBING TO THE
REFRIGERATOR
NOTES:
• Before making tile connection to tile refrigerator,
be sure the refrigerator, po_er cord is not l)lugged,,
into tile _all outlet.
• We recommend installing a water filter if y(mr
water supply has sand or particles that could clog
tile screen of tile reii'igerator's water valve. Install
it in tile water line near the refrigerator. If using
an approved plastic retiigerator robing kit,
you will need an additional robe (WX08X10002)
to connect the filter. Do not cut plastic tube to
install filter.
ReI//oxe tile access cover,
Remoxe tile plastic flexible cap from tile water
valve (refrigerator connection).
Place tile compression nut and ferrule (sleeve)
onto the end of the tubing as shown. On an
approved plastic refl_igerator robing kit, the
nuts are ah'eady assembled to the tubing.
Insert tile end of the tubing into the water valve
cmmection as thr as possible. While holding tile
tubing, tighten the fitting.
For plastic tubing f/"om an appro\ ed plastic
reil"igerator robing kit, insert the molded end
of tile robing into the shutoff _u]ve and tighten
compression nut tmtil it is hand tight, then
tighten one additional tm'n with a wrench.
Overtightening may cause leaks.
[] CONNECT THE TUBING TO THE
REFRIGERATOR (CONT.)
Fasten the tubing into the clamp proxided to
hold it in a xertical position. You may need to
pry open the clamp.
1/4"Tubing
(sleeve)
Approved . Refrigerator
PlasticTubing Connection
[] TURN THE WATER ON AT THE
SHUTOFF VALVE
Tighten am connections that leak.
Reattach the access co_er.
15
Loading ...
Loading ...
Loading ...