Loading ...
Loading ...
Loading ...
6. End of programme - unload the drum
38
End of programme
The programme is finished when Finish/
Anti-crease appears in the display. The
Start/Stop sensor will no longer light up.
The dryer will switch off automatically
15minutes after the end of the Anti-
crease phase (with programmes without
an Anti-crease phase it will switch off
15minutes after the end of the pro-
gramme).
Unloading the drum
Only open the door when the drying
process has finished. Otherwise, the
laundry will not be properly dried
through and cooled down.
Reach under the door grip and pull
the door open.
Remove the laundry.
Items left in the dryer could be dam-
aged by overdrying when the dryer is
used the next time.
Always remove all items from the
drum.
Touch the sensor to switch the
tumble dryer off.
Remove the fluff from the 2 fluff filters
in the door opening: see “Cleaning
and care – Fluff filters”.
Shut the door with a gentle swing.
Empty the condensed water con-
tainer.
We recommend that you drain the con-
densed water externally through the
drain hose when drying a full load using
the Cottons and Cottons pro-
grammes. This will avoid having to
empty the condensed water container
during the programme.
Drum lighting
When you open the door of the tumble
dryer, the drum is illuminated along with
the area immediately in front of the
dryer. This prevents you from accident-
ally leaving behind any items in the
drum or in your laundry basket.
The drum lighting will go out automatic-
ally to save energy.
Tip: To switch the lighting on again,
open the pull-down menu from the
overview menu and then touch the
sensor.
Loading ...
Loading ...
Loading ...