Loading ...
Loading ...
Loading ...
1 Hour Wash
To save water and energy, High Efficiency dishwashers use
advanced filtration which may result in longer cycle times (in some
cases over 2 hours). When you need fast results, the 1 Hour Wash
will clean your dishes using slightly more water and energy. For
improved drying, select the Heated Dry option, adding 1/2hour.
All soil levels 58 58
8.0
(30.3)
Quick Rinse
A 15-minute rinse for reducing food odor and keeping food
residue from drying. Do not use detergent.
All soil levels 15
2.1
16
(7.9)
*Adding options will add time to the cycle. See options information section.
**This is the approximate cycle time obtained with 120°F (49°C) hot water available at the dishwasher. Increase in time
results from low temperature of the incoming water.
Options
Hi Temp
Raises the main wash temperature to
improve cleaning. When used with the
Normal Wash cycle this will provide a
little extra tough cleaning capability, but
not as much as the Pots Pans cycle.
Can be
selected with
SmartWash ®"E
Pots Pans
Normal Wash
What it does
Raises the main wash
temperature from 105°F
(41°C) to 120°F (49°C).
Added time to cycle
Typical
22
Max
37
Added
Water t
Gallons
(Liters)
Sani Rinse
This high temperature option sanitizes
your dishes and glassware in accordance
with National Sanitation Foundation
(NSF)/ANSI Standard 184 for Residential
Dishwashers. Certified residential
dishwashers are not intended for
licensed food establishments. The green
sanitized light indicates that the Sani
Rinse option was successfully
completed.
SmartWash ®HE
Pots Pans
Normal Wash
Increases the main wash
temperature from 105°F
(41 °C) to 120°F (49°C)
and the final rinse from
140°F (60°C) to 155°F
(68°C).
37 57
Heated Dry
Turns the heat element on after the wash
cycle is completed. Use rinse aid with or
without the Heated Dry option for best
drying results. Plastic items are less likely
to deform when loaded in the top dish
rack.
Available with
any cycle
except
Quick Rinse
Turns the heat element
on at the end of the
wash cycle.
26 32 0
tThe maximum additional water used for any combination of options is 2.1 gal. (7.9 L).
Belay Hours
Use this option to run your dishwasher during off-peak hours. Local utility providers recommend using energy during off-peak hours
when possible.
To delay the start
1. Select a wash cycle and options.
2. Press the delay button to choose the number of hours to be delayed.
3. Press START/RESUME and firmly close the door within 3 seconds. The dishwasher starts in the selected number of hours.
NOTE: Anytime the door is opened (such as, to add a dish), the START/RESUME button must be pressed again, within 3 seconds of
closing the door, to resume the delay countdown.
15
Loading ...
Loading ...
Loading ...