Loading ...
Loading ...
Loading ...
Use and Care Information
Tips on everyday care and use
1. To control the temperature:
First, set the cold control on "3". Wait 24 hours
for the entire cabinet to cool. Then adjust the
control if necessary. Setting the Cold Control to
MIN, isthe warmest setting; MAX isthe coldest.
The MAX setting may reduce the temperature
to below freezing, but it will not cool the
refrigerator faster.
The fresh food section should be as cold as
possible without freezing vegetables or milk.
Adjust as necessary.
2. Defrost:
Defrost when 1/4 inch of frost forms. Set the
temperature control dial to OFF for defrosting.
Remove food. Do not touch the freezing plate
with your bare hands_ Do not use electric
defrost devices or hair dryers to melt the frost.
They may damage the plastic parts.
When defrosting is completed, wipe the
freezing plate dry and reset the control dial.
Return food to refrigerator.
3. For all cleaning:
Mix 2 tablespoons baking soda with 1 quart
warm water or use a mild soap. Do not use
strong cleaners, scouring powder or pads. For
persistent odors, contact Sears Service Center
for odor removal products. Do not put the drip
tray in the dishwasher.
Energy Saving tips
1. Close the door as soon as you can after
opening it. Make sure the door isfully shut after
each use sothe cold air does not escape from
the refrigerator cavity.
2. Adjust the Cold Control. Try a warmer setting.
Your refrigerator may be colder than necessary.
Use the condition of milk to check refrigerator
temperature. As long as milk keeps without
spoiling your refrigerator is cold enough.
3. Do Not place hot foods in the refrigerator.
4. Do Not allow more than 1/4 inch of frost to build
up in the freezer compartment.
5. Reduce the number and length of time you
open the door. Your cooling system will not
have to run as often.
6. Keep your refrigerator level, so that the door
seals tightly. When the door is closed, the
door gaskets should touch the refrigerator all
the way around. If not, make your refrigerator
level by use of the adjustable leg located under
the unit.
7. Keep your refrigerator away from stoves or
other heat sources. A cool and dry place allows
your refrigerator to operate more efficiently.
Before Calling for Service
• Check the plug and fuse.
• Test the outlet with a lamp.
• Be sure the control is not set to OFF.
• Read the manual, especially the items under
Use and Care Information. You may find the
answer to your questions.
• If you do not find the answer to your questions
in this manual, find the unit model number (on
the upper back of the refrigerator) and contact
your Sears Service Center.
When reqSeSting Service or ordering parts, alwa_is
provide the following information:
• Product name.
• Model number.
• Part Name
• Part Number
_ ANGER: ELECTRICAL SHOCK HAZARDDisconnect power before servicing.
Loading ...