Liebherr SGNBS3010 304L Upright Freezer

User Manual - Page 13

For SGNBS3010.

PDF File Manual, 32 pages, Read Online | Download pdf file

Loading ...
Loading ...
Loading ...
5.15.3 Setting the water intake time*
The opening time of the IceMaker valve can be set if, for
example, the water pressure in the pipe is too low or too high.
The water intake time can be set in stages from E1 (short intake
time) to E8 (long intake time). The intake is preset at E3.
u
To activate the setting mode: press the SuperFrost button
Fig. 3 (8)
for about 5 s.
w
The display indicates c.
w
Themenu symbol
Fig. 3 (3)
shines.
u
Using the Up setting button
Fig. 3 (1)
or Down setting button
Fig. 3 (2)
select E.
u
To confirm: briefly press the SuperFrost button
Fig. 3 (8)
.
u
To increase the water intake time: press the Up
setting button
Fig. 3 (1)
.
u
To reduce the water intake time: press the Down
setting button
Fig. 3 (2)
.
u
To confirm: press the SuperFrost button
Fig. 3 (8)
.
u
To deactivate the setting mode: press the On/Off button
Fig. 3 (7)
.
-or-
u
Wait for 5 minutes.
w
The temperature is indicated again in the temperature
display.
5.15.4 Switching off the IceMaker*
When the IceMaker is switched off, the IceMaker drawer can
also be used for freezing and storing food.
u
Press the On/Off button for about 1 second until the LED
goes out.
w
The IceMaker symbol
Fig. 3 (13)
goes out.
u
Clean the IceMaker.
w
This ensures that no water or ice remains in the IceMaker.
6 Maintenance
6.1 Defrosting with NoFrost
The NoFrost system automatically defrosts the appliance.
The moisture condenses on the evaporator, is periodically
defrosted and evaporates.
u
The appliance does not have to be manually defrosted.
6.2 Cleaning the appliance
WARNING
Risk of injury and damage as a result of hot steam!
Hot steam can lead to burns and can damage the surfaces.
u
Do not use any steam cleaners!
NOTICE
Incorrect cleaning damages the appliance!
u
Do not use cleaning agents in concentrated form.
u
Do not use any scouring or abrasive sponges or steel wool.
u
Do not use any sharp or abrasive cleaning agents, nor any
that contain sand, chloride or acid.
u
Do not use chemical solvents.
u
Do not damage or remove the type plate on the inside of the
appliance. It is important for the customer service.
u
Do not pull off, bend or damage cables or other compo-
nents.
u
Do not allow any cleaning water to enter the drain channel,
ventilation grille or electrical parts.
u
Please use soft cleaning cloths and a universal pH-neutral
cleaning agent.
u
Please use cleaning and care products suitable for contact
with foodstuffs in the appliance interior.
u
Empty appliance.
u
Pull out the power plug.
u
Clean plastic outer and inner surfaces with lukewarm
water and a little washing-up liquid.
NOTICE
Risk of damage from stainless steel care products!
The stainless steel doors and stainless steel side walls are
finished with a high-quality surface coating.
Stainless steel care products will damage the surfaces.
u
Use only a soft, clean cloth to wipe the coated door
surfaces and side walls. In case of stubborn dirt, use a
little water or a neutral cleaning agent. Another option is to
use a microfibre cloth.
u
Clean items of equipment by hand with lukewarm water
and a little washing-up liquid.
After cleaning:
u
Wipe dry the appliance and items of equipment.
u
Connect the appliance and switch it on again.
u
Switch on SuperFrost (see 5.8) .
When the temperature is sufficiently cold:
u
Put the food back inside.
6.3 Cleaning the IceMaker*
The drawer of the IceMaker has to be emptied and slid in.
u
To activate the setting mode: press the SuperFrost button
Fig. 3 (8)
for about 5 s.
w
The display indicates c.
w
The menu symbol
Fig. 3 (3)
shines.
u
Using the Up setting button
Fig. 3 (1)
/ Down setting button
Fig. 3 (2)
select I.
u
To confirm: press the SuperFrost button
Fig. 3 (8)
.
u
Using the Up setting button
Fig. 3 (1)
/ Down
setting button
Fig. 3 (2)
select Ic.
u
To confirm: press the SuperFrost button
Fig. 3 (8)
.
w
The IceMaker moves into the cleaning position and switches
off.
u
To deactivate the setting mode: press the On/Off button
Fig. 3 (7)
.
-or-
u
Wait for 2 minutes.
w
The temperature is indicated again in the temperature
display.
u
Remove the drawer.
Maintenance
* Depending on model and options 13
Loading ...
Loading ...
Loading ...