Loading ...
Loading ...
Loading ...
1. Plan where and how the ductwork will be located.
Install proper-sized ductwork, transition(s), elbow(s), and roof or wall cap. For best results, use a minimum number of
transitions and elbows. Use 2" duct tape to seal duct joints.
The minimum hood distance above cooktop must not be less than 24". A maximum of 30" above cooktop is highly
recommended for best capture of cooking impurities.
Distances over 30" are at the installer and users discretion.
Roof cap
- Hood
24" minimum above
cooking surface
Roof cap
iNSTALLATiON WiTH
RECTANGULAR DUCT
Wall
cal_
OR 7"
round duct
Transition
x 10" to 6" OR
3W' x 10" to t'
- Hood
L24" minimum above
cooking surface
HHOO57A
iNSTALLATiON WiTH
ROUND DUCT
1. If the bottom of the cabinet is recessed, attach three 1" wide wood strips (not included), as shown below, in order to
properly attach the hood to the cabinet. The wood strips must be as thick as the recess.
CABINET BOTTOM
1'
HD0026A
2. Cut-out the openings for duct (A) and power cable (B), in cabinet or wall, according to the direction or discharge
chosen. See figures below.
HORIZONTAL DISCHARGE VERTICAL DISCHARGE
CABINET BOTTOM
ยข
HD0162 1V2"dia.
5W' 5W'
HD0163A 3/4 _
Loading ...
Loading ...
Loading ...