Craftsman 917273080 tractor

User Manual - Page 24

For 917273080.

PDF File Manual, 64 pages, Download pdf file

Loading ...
Loading ...
Loading ...
_CAUTION:Beforeperforminganyserviceoradjustments:
Depressclutch/brakepedalfuUyandsetparkingbrake.
Placemotioncontrolleverinneutral(N)position.
Placeattachmentclutchin"DISENGAGED"position.
Turnignitionkey"OFF"andremovekey.
Makesurethebladesandallmovingpartshavecompletelystopped.
Disconnectsparkplugwirefromsparkplugandplacewirewhereitcannot
comeincontactwithplug.
TRACTOR
TO REMOVE MOWER
Place attachment clutch in "DISEN-
GAGED" position.
Turn height adjustment knob to lowest
setting.
Lower mower to its lowest position.
Remove retainer spring holding anti-
swaybar to chassis bracket and
disengage anti-swaybar from bracket.
Remove retainer springs from suspen-
sion arms at deck and disengage arms
from deck.
Raise attachment lift to its highest
position.
Remove two retainer springs from
each front link and remove links.
Slide mower forward and remove belt
from electric clutch pulley.
Slide mower out from under right side
of tractor.
IMPORTANT: If an attachment other
than the mower deck is to be mounted
on the tractor, remove hte front links.
TO INSTALL MOWER
Follow procedure described in "INSTALL
MOWER AND DRIVE BELT" in the
Assembly section of this manueL,
Adjustment
TO LEVEL MOWER HOUSING
Adjust the mower while tractor is parked
on level ground or driveway, Make sure
tires are properly inflated (See "PROD-
UCT SPECIFICATIONS" section of this
manual). If tires are over or
underinflated, you will not properly
adjust your mower.
SIDE-TO-SIDE ADJUSTMENT
Raise mower to its highest position.
Measure height from bottom of deck
curl to ground level at front corners of
mower. Distance "A" on both sides of
mower should be the same.
If adjustment is necessa.'y, make
adjustment on one side of mower only.
To raise one side of mower, tighten lift
link adjustment nut on that side.
To lower one side of mower, loosen lift
link adjustment nut on that side.
NOTE: Each full turn of adjustment nut
will change mower height about 3/16".
Recheck measurements after adjust-
ing.
Front Mower
Bracket
Lift Links
Chassis
\
Retainel
Spring
Anti-Sway
Springs
Springs
Front Mower
Bracket
?4
Loading ...
Loading ...
Loading ...