Zanussi ZCV46250BA Electric cooker

User Manual - Page 9

For ZCV46250BA.

PDF File Manual, 28 pages, Read Online | Download pdf file

ZCV46250BA photo
Loading ...
Loading ...
Loading ...
Use the trivet only with the Grill- /
roasting pan.
BEFORE FIRST USE
WARNING! Refer to Safety chapters.
INITIAL CLEANING
Remove all accessories and removable shelf
supports from the appliance.
Refer to "Care and cleaning" chapter.
Clean the appliance and the accessories before
first use.
Put the accessories and the removable shelf
supports back to their initial position.
SETTING AND CHANGING THE TIME
You must set the time before you operate the oven.
When you connect the appliance to the electrical
supply or after a power cut,
flashes.
Press the or to set the correct time.
After approximately 5 seconds, the flashing stops
and the display shows the time of day.
To change the time, press
again and again until
starts to flash.
PREHEATING
Preheat the empty appliance before first use.
Preheat the two ovens. Heat up one
oven at a time.
1. Set the maximum temperature.
2. Let the appliance operate for 1 hour.
3. Set the function .
4. Let the appliance operate for 15 minutes.
Accessories can become hotter than usual. The
appliance can emit an odour and smoke. This is
normal. Make sure that the airflow is sufficient.
HOB - DAILY USE
WARNING! Refer to Safety chapters.
HEAT SETTING
Symbols Function
Off position
1 - 6 Heat settings
Use the residual heat to decrease
energy consumption. Deactivate the
cooking zone approximately 5 - 10
minutes before the cooking process is
completed.
Turn the knob for the selected cooking zone to a
necessary heat setting.
To complete the cooking process, turn the knob to
the off position.
RESIDUAL HEAT INDICATOR
WARNING! As long as the indicator
is on, there is a risk of burns from
residual heat.
The indicator appears when a cooking zone is hot,
but it does not function if mains power is
disconnected.
The indicator may also appear:
for the neighbouring cooking zones even if you
are not using them,
when hot cookware is placed on cold cooking
zone,
when the hob is deactivated but the cooking
zone is still hot.
The indicator disappears when the cooking zone
has cooled down.
9
Loading ...
Loading ...
Loading ...