Loading ...
Loading ...
Loading ...
18
10,000 Btu Portable Air Conditioner
www.insigniaproducts.com
3 Reinstall the battery compartment cover, making sure the tab locks
into place.
Using the air conditioner
You can control your air conditioner by using the control panel on the
front of the unit, or by using the remote control. If using the remote
control, always point it at the air conditioner.
Notes
• Use only carbon-zinc or alkaline batteries. Do not use
rechargeable batteries.
• When you replace the batteries, always replace them with
new batteries. No not mix old and new batteries.
• If your air conditioner will not be used for an extended
period of time, remove the batteries from the remote
control.
Cautions
• If the fluid from inside the batteries comes into contact with
your skin or clothes, wash immediately with clean water.
• Do not use the remote control if the batteries are leaking.
• If the fluid from inside the batteries gets into your mouth or
eyes, flush immediately with clean water and contact a
doctor for treatment.
Button Description
Press to turn your air conditioner on or off.
When you turn the air conditioner on, you will hear a tone and the air discharge automatically opens. The
display shows the set temperature and the current mode.
When you turn your air conditioner off, you will hear a tone and the air discharge closes. Control settings, such
as Mode, Set Temperature, Auto Swing, and so on, are retained in memory when the power is off (unless the
unit has been unplugged).
Press to cycle through the operating modes (COOL, FAN, DRY, or ENERGY SAVER [AUTO]). The LED next to the
Mode button displays the active mode. The default mode is COOL.
COOL–The compressor runs and cools the room. Use the
or
and SPEED buttons to set the desired
temperature and fan speed.
FAN–The fan circulates the air, but the compressor does not run to cool it. Use the SPEED button to set the
desired fan speed.
DRY–The fan and dehumidifier both run to remove humidity from the air. After the set temperature is reached,
the compressor and fan turn off. The fan speed is preset and cannot be adjusted.
AUTO (ENERGY SAVER)– If the ambient temperature is above 77° F (25°C), the air conditioner operates in
cooling mode. If the ambient temperature is below 77° F (25°C), the air conditioner operates in fan mode.
Cycles through the available fan speeds (F1-Low, F2-Medium, F3-High). The LED next to the Speed button
displays the fan speed. The speed can be selected in either the COOL or FAN modes.
MODE
SPEED
NS-AC10P6WH NS-AC10P6WH-C_15-0316_MAN_V2_ENG.fm Page 18 Thursday, March 19, 2015 8:04 AM
Loading ...
Loading ...
Loading ...