Loading ...
Loading ...
installation & setup
1 | turn off power to device at circuit breaker
Plug a light or a fan into the outlet and turn it on. Next go the circuit breaker and
turn off the breaker that connects to the outlet. Confirm that power is now out to
BOTH receptacles.
NOTE: Ensure power is off to all devices in electrical box.
2 | remove existing device
Check for the following wires:
a
HOT or LINE: Receives power from the circuit box. Referred to as “hot” for
the purposes of this guide. Do not touch or let “hot” wires contact other wires.
b
NEUTRAL: Creates a path to return current to the power source when the
device is off. Required for your outlet installation.
c
GROUND: Provides a safe path for electricity in the event of a short circuit.
1
2
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
VOLTAGE
TESTER
Loading ...
Loading ...
Loading ...