Loading ...
Loading ...
Loading ...
10- ENG
GET TO KNOW THE PRESSURE WASHER
NOTE: Photographs and line drawings used in this manual are for reference
only and do not represent a specificmodel.
Compare the illustrations with your unit to familiarize yourself with the location of
various controls and adjustments. Save this manual for future reference.
9
11
G
C
B
1
K
E
H
I
J
A
D
BASIC ELEMENTS OF A PRESSURE WASHER (FIG. 1)
A. High Pressure Pump: Increases the pressure of the watersupply.
B. Engine: Drives the high pressure pump. Refer to the Engine Owner's Manual
for location and operation of enginecontrols.
C. High Pressure Hose: Carries the pressurized water from the pump to the gun
and spray wand.
D. Spray Gun: Connects with spray wand to control water flow rate, direction
andpressure.
E. Spray Wand: See How To Use Spray Wand instructions in Operationsection.
F. Detergent Siphon Hose (not shown)
(if equipped)
: Feeds cleaning agents
into the pump to mix with the water. See
How To Apply Chemicals/Cleaning
Solvents
instructions in
Operation
section.
G. Handle
H. Frame
I. Pump Outlet
J. Pump Inlet
Loading ...
Loading ...
Loading ...