Loading ...
Loading ...
Loading ...
0
ENGLISH
Getting Started
Connections Remote Control Information Troubleshooting
Specifi cationsMulti-ZoneSettings
Playback
Playing Components
1
Prepare for playback.
① Turn on the power of the TV, subwoofer and player.
② Set the TV’s input to the AVR-890.
③ Load the disc in the player.
2
Turn on the AVR-890’s power.
(vpage 19 “Turning the Power On”)
3
Press and select the input
source.
4
Play the component connected to
the AVR-890.
Make the necessary settings on the
player (language setting, subtitles
setting, etc.) beforehand.
5
Use to adjust the volume.
GVariable rangeH
– – –
–80.5dB ~ 18.0dB
※ The variable range differs according to the input signal and
channel level setting.
6
Select the desired surround mode.
(vpage 44 “Selecting the Surround Mode”)
7
Adjust the desired sound eld effects.
(vpage 46 “Adjusting the Sound and Picture Quality”)
The following describes the procedure for playing Blu-ray disc/
DVD players.
Use the same procedure to play other components.
Playing Blu-ray Disc / DVD Players
The music / video on an iPod can be played by using the control
dock for iPod (ASD-1R, ASD-11R, ASD-3N or ASD-3W sold
separately).
Connect the control dock for iPod beforehand (vpage 14 “iPod
®
”).
iPod
®
Playback
1
Prepare for playback.
q Set the iPod in the DENON control dock
for iPod.
w Assign the control dock for iPod’s input
(vpage 35).
e Set to “MAIN/TV” to “MAIN”.
2
Turn on the AVR-890’s power.
(vpage 19 “Turning the Power On”)
3
Press to select the input source assigned in step
1-w above.
(iPod screen)
b If the screens above are not displayed, the iPod may not be
properly connected. Try connecting again.
Listening to music on an iPod
®
OK to disconnect.
Front
Adjusting the Sound and Picture Quality
(Audio/Video Adjust) (vpage 46)
Playing Components (vpage 40)
n Playing Blu-ray Disc/DVD Players (vpage 40)
n iPod
®
Playback (vpage 40)
n Listening to FM/AM Broadcasts (vpage 41)
n Listening to SIRIUS Satellite Radio Programs
(vpage 42)
n Operations During Playback (vpage 44)
n Operation Flow
Before starting playback, make the connections between the
different components and the settings on the receiver.
Selecting the Surround Mode (vpage 44)
q Standard Playback (vpage 44)
w Playing in a DENON original surround mode
(vpage 45)
e Direct Playback (vpage 45)
r Stereo Playback (vpage 46)
t Playing the Pure Direct mode (vpage 46)
NOTE
● Also refer to the operating instructions of the connected
components when playing them.
● External devices can be controlled by remote control unit
(vpage 55 “Operating the Connected Devices by Remote
Control Unit”).
See overleaf
Front
Front
Playback
Loading ...
Loading ...
Loading ...