Loading ...
Loading ...
Loading ...
Assembly
1. Loosen the base locking nut from the bottom of the fan by turning it anticlockwise. Then
push it down along he power cord so it is out of the way.
1. Run the power cord through the central gap between the 2 halves of the base.
2. Connect the 2 halves of the base by pushing the plastic pegs on each half into the
corresponding slots on the other half.
3. Move the base locking nut back into position and fully tighten it in a clockwise direction.
4. Pass the power cord through the guides on the base so that it comes out the rear of the
base.
Loading ...
Loading ...
Loading ...