Danby DAC120EUB2GDB OWNER’S USE AND CARE GUIDE

Loading ...

OPERATING INSTRUCTIONS

USING THE REMOTE CONTROLLER BUTTONS

Model / Modèle :

R15B

TIMER OPERATION

To set the Auto-stop time

1. Push the TIMER button when the unit is operational; only the Auto-stop feature can

be set.

2. Keep pressing the + and - button. Each time pressed will increase the selected time

by 0.5 hour increments for the ﬁ rst 10 hours and then by 1 hour increments up to 24

hours.

3. The time can be set in a range of 0-24 hours.

4. After the desired time has been selected, wait for about 10 seconds, until the setting

temperature reappears in the display window of the air conditioner. This indicates that

the program has been set.

NOTE:

To cancel the TIMER setting, push the + or - button until “0 hours” is displayed on the

LCD window of the air conditioner.

-----------------------------------------------------------------------------------------------------------------------

Model / Modèle :

R15B

ENERGY SAVER OPERATION

This function is available in Cool, Dry, and Auto modes (only Auto-Cool and Auto-Fan

modes). The fan will continue to run for 3 minutes after the compressor has shut off. The

fan then cycles on for 2 minutes at 10 minute intervals, until the room temperature is

above the set temperature. At this point, the compressor turns back on and cooling starts.

-----------------------------------------------------------------------------------------------------------------------

Loading ...

Danby DAC120EUB2GDB 12,000 BTU Window Air Conditioner with 550 sq. ft. Cooling Capacity