Loading ...
Loading ...
Loading ...
23
USA
6.4 AUXILIARY FUNCTIONS
Washing programs of your dishwasher are
designed to obtain the best cleaning effect,
considering the type of the soiling, soiling
degree and properties of the dishes to be
washed.
Auxiliary functions allow you save from
time, water and power.
C
Auxiliary functions may cause
changes in the program
duration.
C
Auxiliary functions are not
suitable for all washing
programs. Indicator of the
auxiliary function that is not
compatible with the program
will not be active.
Deep Wash function
(depends on the model)
AA
The Bottle/Pot
washing impeller (A)
under the lower
impeller allows better
washing of your
bottles and dishes
with intense dirt that
are placed on the
right-hand side of the lower basket as per
the selected program.
Deep Wash Do not attempt to remove
the impeller part!
Selecting this function extends the
program period.
The program may be used as Pot
Washing or Bottle Washing functions
as per your selection.
Fast Function
It shortens the time of the washing cycle
selected and decreases water consumption
by enabling washing under higher pressure.
SteamGloss Function
It provides superior drying performance by
increasing rinsing temperature and drying
time.
Sanitize Function
Sanitize function raises the water
temperature in the final rinse to meet the
requirements of NSF/ANSI STANDARD
184 for Residential Dishwashers. Certified
residential dishwashers are not intended
for licensed food establishments.
C
At the end of a succesfull
sanitization “SAN“ is displayed
on the display. “SAN” is not
displayed on the display if the
cycle is interrupted or the water
could not be heated to the
required temperature.
C
Available programs are
indicated on Program Table
chart.
C
Note: Only sanitizing cycles
have been designed to meet
the requirements of NSF/ANSI
Standard 184 for soil removal
and sanitization efficacy.
There is no intention, either
directly or indirectly, that all
cycles have passed sanitization
performance tests.
Functions Under the Settings
Menu
(Select models)
Under the settings menu of your product,
there are some additional functions that
depend on the model.
To access these functions, press and hold
the Menu key for 3 seconds. Use <- and
+> to proceed to the desired function or
setting.
Use the selection key to change the desired
function or setting and press the Menu key
to exit the Settings menu.
C
In some models pressing the
Menu key only for once will
allow you to enter the Settings
menu.
Loading ...
Loading ...
Loading ...