Loading ...
Loading ...
HEAT LIVE RELAX
CONTROL FUNCTIONS
GETTING STARTED
1. Carefully remove the heater from packaging and the carton, and unwind the cord to its full length.
2. Either fit the castors and wheels then place the heater onto a stable, flat and dry surface, or fit the supplied
mounting brackets to a stable wall & hang from the wall in a dry position away from open or running water.
See installation sections for details.
3. Turn the heater off at the power switch (on the top right hand side of the unit). Plug the cord set into a
220-240V~A.C. 50Hz electrical outlet. Turn the power on at the electrical outlet.
4. Turn the heater on at the power switch (on the right hand side of the unit). If in stand-by mode, press the power
button to start the appliance, and press again to put back to stand-by mode.
NOTE: Heater must have castors fitted or be attached to a wall before use.
1. Temperature Adjustment Knob
2. Heater Operation Indicator
3. Main Power Switch (On/Off) I:750W, II:1050W, I&II:1800W
4. Vent/ Warm Air Discharge
5. 240 Volt Power Cord and Plug
6. Air Inlets
7. Castors and Wheels
Loading ...
Loading ...
Loading ...