Loading ...
Loading ...
Loading ...
3
Door reversal instruction
There is no spare parts required for door reversal job.
The following tool is required, flat screwdriver, phillips screwdriver, adjustable spanner,
socket wrench and 8mm socket.
1. Make sure that your refrigerator is unplugged.
2. Use a flat screwdriver to remove the hinge cover, remove the three screws that secure
the upper hinge, then remove the upper hinge.
3.Remove the freezer door from the cabinet.
4. Remove the two screws that secure the center hinge.
5.Remove the refrigerator compartment door.
6. Remove the four screws that secure the lower hinge to the right side of the cabinet,
then remove the hinge.
7. Remove the washer and nut that secure the pin shaft to the right hole on the lower
hinge, then remove the shaft and pin screw.
8. Insert the pin screw into the right hole and insert the pin shaft into the left hole on
the lower hinge, then secure the shaft with the washer and nut.
9. Install the lower hinge on the left side of the cabinet.
Loading ...
Loading ...
Loading ...