Loading ...
Loading ...
Loading ...
5.2 Connections
Install the dishwasher so as to allow ease of access to the electrical and
hydraulic connections through the adjacent unit. These connections must
never
be behind the dishwasher. The inlet and drain hoses can be pointed in all
directions. make sure that they are not bent, crushed or too tight. Tighten
the ring nut after pointing the hoses in the required direction.
Figure 7 indicates the distances to maintain between the dishwasher and
the various connections.
FIRE HAZARD!
DO NOT COVER OR CRUSH THE CORD PLUG.
A through hole with a diameter of at least 8 cm (5/32”) is required to pass
the hoses and power cord (ref. A fig. 8). Make sure there area no rough
edges that could damage the power cord or hoses. If the dishwasher is
installed in a metal unit protect the edge of the through hole for the hoses
and power cord with a gasket. Do not use extension cords when making
the electrical connection as these do not guarantee safety.
ATTENTION!
INSTALLING THE DISHWASHER IN A NARROW SPACE MAY BEND
OR CRUSH THE POWER CORD. TAKE GREAT CARE IN ORDER TO
REDUCE THE POSSIBILITY OF DAMAGING THE POWER CORD
WHEN INSTALLING OR REMOVING THE APPLIANCE.
INSTALLATION INSTRUCTION
Fig.7
Fig.8
EN
13
Loading ...
Loading ...
Loading ...