Loading ...
Loading ...
Loading ...
6
motor turn the basket in short pulses to thoroughly wet the
load. The washer will then move the load briefly, pause to
allow water to soak in to the load, and resume adding water.
This process may repeat until the correct amount of water
has been added for the load. You may also hear water flowing
through the dispenser, adding detergent to the load.
NOTE: Avoid opening lid during sensing. The sensing
process will start over when the washer is restarted. The
sensing light may also come on during the Wash portion of
the cycle. This is normal.
WASH
You will hear the motor and agitator moving the load. Unlike
traditional washers, the load is not covered with water. Rather
than diluting detergent as done in an agitator-style washer,
this washer delivers the detergent directly to the soils. The
motor sounds may change at different stages in the cycle.
The wash time is determined by the selected soil level.
RINSE
You will hear sounds similar to the wash cycle as the washer
rinses and moves the load. Fabric softener will be added if
the Timed Dispensers Fabric Softener option was selected.
SPIN
The washer spins the load at increasing speeds for proper
water removal, based on the selected cycle and spin speed.
DONE
Once the cycle is complete, this light will come on. Remove
the load promptly for best results.
LID LOCKED
To allow for proper load sensing and spinning,
the lid will lock and the Lid Locked light will turn
on. This light indicates that the lid is locked and
cannot be opened.
If you need to open the lid, touch START/PAUSE.
The lid will unlock once the washer movement
has stopped. This may take several minutes if the
load was spinning at high speed. Touch and hold
START/PAUSE button again for up to 3 seconds
to restart the cycle.
Avoid opening the lid during sensing. The sensing
process will start over when the washer is restarted.
DEEP FILL & AUTO SENSING WATER LEVEL
STATUS LIGHTS
DEEP FILL
The Deep Fill mode is OFF by default but can be turned
on for any cycle except Sanitize with Oxi & Steam or
Sanitize with Oxi (depending on model), Drain & Spin,
and Clean Washer with affresh
®
.
When selecting Deep Fill, the Deep Fill light will turn on
and the Auto Sensing Water Level Status Lights will turn
off.
In Deep Fill mode, the washer will fill to a predetermined
water level deeper than auto sensing based on initial load
size sensed, allowing for greater flexibility in how you
wash your clothes.
NOTE: Expect longer cycle times due to extended fill
times when using the Deep Water Wash option.
AUTO SENSING WATER LEVEL STATUS LIGHTS
When the machine is operating in Low Water Wash mode
(Deep Fill is OFF), these status lights provide feedback
on the load size that has been detected. When powering
up the unit in Low Water Wash mode, all three lights will
be lit. The lights will remain lit until the Sensing portion of
the cycle is complete. The machine will now illuminate the
light reflecting the detected load size.
NOTE: These lights only function when Deep Fill mode
is OFF.
9
Loading ...
Loading ...
Loading ...