Loading ...
Loading ...
Loading ...
Before you call for service...
Troubleshooting Tips
Possible Causes What To Do
Excessivesmoking Excessivesoil. • Touchthe Clear/Off pad.
Oven door will not open Oven too hot. • Allow the oven to cool below lockingtemperature.
after a clean cycle
Oven not clean offer Oven controls not properly set. • Seethe Usingthe self-cleaning oven section.
a clean cycle Oven was heavily soiled. • Clean up heavy spilloversbefore starting the clean cycle.
Heavily soiled ovens may need to self-clean again or for
a longer period of time.
Oven door will not Oven istoo hot. • Allow the oven to cool below locking temperature.
unlock (on models Do not lock the door with the door latch except when
with a door latch) using the self-clean feature.
Self clean light blinks A power interruption occurred. • Touch the Clear/Off pad, wait for the oven to cool, and
during self clean cycle on models with a latch, move it to the left as far as
it will go. Reset the range controls to the desired
settings. See the Using the self-cleaning oven section.
Self-cleaning cycle has been
selected,but the oven door was
not closed, and on models with a
latch, it was not moved all the
wag to the right.
• Closethe oven door On models with a latch, move it all
the way to the right.
On models with a latch, it
was moved to the right, but a
program other than self-cleaning
was selected.
• Hove the latch handle to the right only when setting
the self-cleaning cycle.
"F--and a number or On models with a door latch, • The latch may have been moved, even if only slightly,
letter" flash in the if a function error code appears from the locked position. Hake sure the latch is moved
display tonsomemodels) during the self-cleaningcycle, to the right as far as it will go.
check the oven door latch.
You have a function error code. • Touch the Clear/Off pad. Allow the oven to cool for
one hour Put the oven back into operation.
If the function code repeats. • Disconnect all power to the range for 5 minutes
and then reconnect power If the function error
code repeats, call for service.
48
Loading ...
Loading ...
Loading ...