Loading ...
Loading ...
Loading ...
4. (OPTIONAL)IfyourdryerhasaTemperatureselector,setitto
therecommendedsettingforthetypeoffabricbeingdried.
SeeDryerCycleDescriptions(separatesheet)fortemperature
suggestions.Onsomemodels,temperatureisincludedinthe
cycleselections.
5. (OPTIONAL)YourdryermayhaveaWRINKLEPREVENT
setting.Whenyouareunabletoremovealoadfromthedryer
assoonasitstops,wrinklescanform.Thisfeature
periodicallytumbles,rearrangesandfluffstheloadwithout
heattohelpavoidwrinkling.
6. (OPTIONAL)YourdryermayhaveanEndofCycleSignalas
partofthePushToStartbutton.Thissignalishelpfulwhen
dryingitemsthatshouldberemovedfromthedryerassoon
asitstops.TurnthePUSHTOSTARTbuttontoONorOFR
ThesignalwillsoundonlyiftheselectorissettoOn.
7. Ifdesired,addfabricsoftenersheet.Followpackage
instructions.
8. PressPUSHTOSTART.
Stoppingand Restarting
You can stop your dryer anytime during a cycle.
To stop your dryer
Open the dryer door or turn the Cycle Control knob to OFF.
NOTE: The Cycle Control knob should point to an Off area when
the dryer is not in use.
To restart your dryer
Close the door. Select a new cycle and temperature (if desired).
Press PUSH TO START.
How Auto-Sense Dry Works
During the Auto-Sense Dry Cycle, the exhaust temperature of the
dryer determines the drying time and dryness levels. A thermostat
signals the Cycle Control Knob when to move into Cool Down.
The drying time for an Auto-Sense Dry Cycle depends on load
type and load size. When drying a large or heavy load, the Cycle
Control Knob may take a long time before it begins to advance
into Cool Down. The Auto-Sense Dry Cycle takes the guesswork
out of drying time and enhances fabric care. The amount of time
that is displayed is the estimated time remaining in the cycle.
How Auto-Sense Dry Plus Works
When you are using the Auto-Sense Dry Plus Cycle, the dryness
of the load is determined by two metal strips (sensors) located on
the inside of the dryer. The metal strips help "feel" the amount of
moisture left in the clothes as they pass. When there is moisture
left in the clothes, the Cycle Control Knob will not advance. As
clothes begin to dry, the amount of water left in the clothes
decreases, and the timer advances through the remainder of the
cycle. When the selected dryness level is reached, the dryer goes
into a cool down period of up to 10 minutes.
Use the Drying Rack to dry items such as sweaters and pillows
without tumbling. The drum turns, but the rack does not move.
If your model does not have a drying rack, you may be able to
purchase one for your model. To find out whether your model
allows drying rack usage and for ordering information, please refer
to the front page of the manual or contact the dealer from whom
you purchased your dryer.
NOTE: The rack must be removed for normal tumbling. Do not
use the automatic cycle with the drying rack.
To use the drying rack
1. Place drying rack in dryer.
Style 1: Your drying rack has front legs. Slide rear pegs into
the dimples on the back wall of the dryer. Lower the front legs
to rest on the dryer opening.
Style 2: Your drying rack does not have front legs. Do not
remove the lint screen. Slide drying rack over the bottom of
the dryer door opening. Push down to secure rack on frame.
2. Put wet items on top of rack, leaving space between items.
Do not allow items to hang over the edge of the rack. Close
the door.
3. Select a timed drying cycle and temperature, or an air cycle.
Items containing foam, rubber or plastic must be dried on a
clothesline or by using an air cycle. Refer to the following
table.
4. Start the dryer. Reset cycle to complete drying, if needed.
Rack Dry Cycle Temp Time
Washable wool items (block Timed Low 60 min.
to shape, lay flat on rack)
Stuffed toys/pillows (cotton Timed Low 60 min.
or polyester filled)
Stuffed toys/pillows Air N/A 90 min.
Foam rubber filled (no heat)
Loading ...
Loading ...
Loading ...