Loading ...
Loading ...
Loading ...
©2019 ACP, Inc.
Cedar Rapids, IA 52404 Page 22 of 24
Part No. 20269701
Revised 12/2019
PIN Code
If enabling PIN Code, select a
4-digit numeric PIN� PIN Code
must be enabled before trained
technician may enter Service Mode
Preheat Warning
To guarantee that oven reaches
the desired temperature before the
start of cook cycle, enable Preheat
Warning in user options� Enable
setting when using recipe with dierent starting
temperature than default Preheat Temperature
User Options
There are several options you can change to customize the operation of the
oven for your business� The table on page 23 shows these options; the factory
setting is shown in bold type�
Access and Modify User Options:
1� Touch the blue menu icon at the bottom of the screen�
2� Scroll down and touch to select “User Options.”
3� Use this menu to modify oven settings�
Touch the left arrow to return to the menu after making each change�
Note: You may also make user options changes using the ACP
Programming Application�
Note: Programming the preheat temperature in the user options menu will set
the oven to heat to a certain temperature each time it is powered on
Allow Manual Cook
Allow Manual
Cook option must be enabled in order
to view Allow Manual Save options�
Clean Filter Reminder
When “Clean Filter” message displays,
clean air lters thoroughly. Cleaning
the air lters will not shut o
message. Message will automatically
stop displaying after 24 hours�
a� Check “Filter Cleaned” box to conrm
clean�
b� Select “Dismiss” to close popup.
Note: If “Filter Cleaned” box is checked,
reminder time resets�
Necessary cleaning
frequency of air
lters dependant
on microwave use
and environmental
conditions� Once frequency
is determined, set the user
option for appropriate time
frame�
Air lters and vents must be cleaned
regularly to prevent overheating of oven�
Refer to “1. Clean Air Filter” on page 21
for cleaning instructions�
2
Time and Date
This oven maintains a data log of
information, including date and
time of operation� This information
is used to diagnose and
troubleshoot errors� An accurate
date and time are important for the
data log�
1� Select Time� Choose format
(12 HR or 24 HR)� Enter local time�
2� Touch the left arrow to return�
3� Select Date� Choose format
(MM/DD/YYYY or DD/MM/YYYY)�
Enter today’s date�
4� Touch the left arrow to return�
Loading ...
Loading ...