Loading ...
Loading ...
Loading ...
About washer features.
3 N
4 OPTIONS
AUTOSeAS FABRICSOFTenER
_E×TEN_EOSP_ AUTO +_d _S_
SOAK
The Fabric Softener Dispenser (on some models)
The fabric softener dispenser automatically releases liquid fabric softener at the proper time
during the cycle.
Do not stop the washer during the first spin. This will cause the dispenser to empty
too soon.
Never pour fabric softener directly on clothes. This mug cause stains on gout clothing.
To use, follow these steps:
-] ift the tab on the fabric softener
dispensertop.
Heasure out fabric softener into
the cap and pour the softener into
the dispenser top.Thefabric softener
will drain into the receiving cup inside
the dispenser.Useonly "Ultra"or
concentrated fabric softeners.
NOTE:Overfilling the dispenserwill cause
fabric softener to drain out ofthe holesin the
sideof the infusor when filling. Do not overfill.
%
Pushdown on the tab to close
the dispensertop. Hake surethe tab
ispushed down fully and snaps shut.
E] SelectFABRICSOFTENERfrom OPTIONS
on the control panel.
6
TurningTabs
TurningTabs
Cleaning the Fabric Softener Dispenser (onsome models)
TheFabric Softener Dispenserisself cleaning.This dispenserdoes not require regular cleaning
likestandard fabric softener dispensers.Wipe down exterior surfaces of the dispenser
as needed.If cleaning of the internal dispenser components isneeded,follow these steps
after the wash cycle iscomplete:
E]
Liftthe dispenser top tab and turn the top
counterclockwise using the 2 turning tabs
shown. Liftthe dispenser out of the
InfusorTM.
@
Cleanout any buildup from insidethe
InfusorTM with asoft cloth or toothbrush.
Ensurethe three rectangular holes
in the bottom which allow the fabric
softener to drain are not blocked.
Gently pullthe cap away from
the dispenser cup to separate.
Wipe surfaces with a soft cloth or soak
the parts in a solution of I gallon warm
water, 1/4 cup liquid detergent and I cup
bleach. Ensurethe small hole in the top
surface of the cap and associated tube
are not obstructed.
Reassemblethe dispensercup and cap
by snapping them together.
Placethe dispenser assemblLjinto
the InfusorTM. Turnthe top clockwise
using the 2 turning tabs shown. Push
down on the tab to close the dispenser
top. Hake surethe tab ispusheddown
fully and snaps shut.
Loading ...
Loading ...
Loading ...