Loading ...
Loading ...
Loading ...
CONNECTING THE 3-SPEED FAN CONTROL TO THE REMOTE FAN
1. Power supply required for remote fans are 15 amps. @ 120V. AC, 60Hz. connected per local codes.
2. Run three #14 AWG wires (black, white and green) from the power supply at the electrical circuit panel
in the hood J-box (see Figure 6).
3. Run five wires from hood J-box through the walls to the remote fan, using color coded wires
corresponding to color codes in diagram (see Figure 7. Page 6)
4. Locate the white plastic Moldex electrical connector in the hood. This connector feeds the power to the
remote fan. Use the receptacle connector provided with the fan and plug to the connector in the hood.
Within the J-box, connect the black, white, red and blue wires from the remote fan to the black, white,
red and blue wires of the “pigtail”. Connect the green (ground) wire to the ground wire from the service
panel (see Figure 6.)
Loading ...
Loading ...
Loading ...