Loading ...
Loading ...
Loading ...
4
Check carefully that the voltage and frequency of the power net match the
indications on the rating label of the appliance.
The plug must be plugged into an appropriate outlet that is installed and grounded in
accordance with all local standards and requirements.
Only use the utensils included with the appliance.
Keep hands and utensils out of blender jar while blending to reduce the risk of severe
injury to persons or damage to the blender (another trade name may be used). A
scraper may be used but must be used only when the blender is not running (does not
apply to an acceptable scraper integral with the appliance).
Blades are extremely sharp. When handling blade assembly, always hold by the shaft.
Handle carefully.
To reduce the risk of injury, never place cutter-assembly blades on base without
blender jar properly attached.
To avoid a risk of injury, before pouring with the cover removed, carefully remove the
blade assembly.
Do not operate this appliance with a damaged cord or plug or in the event the
appliance malfunctions or has been damaged in any manner. Return the appliance to
the Comfee Service Department or its service agent for examination, repair, or
electrical or mechanical adjustment. Do not try to repair the appliance yourself.
To protect against electrical shock or burns, do not immerse unit, cord, or plug-in
water or other liquid.
A short power supply cord is provided to reduce the risk of becoming entangled in or
tripping over a longer cord. DO NOT USE WITH AN EXTENSION CORD.
Unwrap the cord completely to prevent overheating of the cord.
Do not let the power supply cord hang over the edge of a counter or touch hot
surfaces.
Do not allow the power cord supply to run underneath or around the unit.
Do not use the appliance if there is any water in it or the parts are still wet after
cleaning.
Do not use the appliance without ingredients.
Handle with great care when using sharp accessories like knives. Only handle when
food content stops moving inside the appliance.
Failure to maintain this appliance in a clean condition could adversely affect the life of
the appliance and possibly result in a hazardous situation.
Any injury or damage caused by failure to comply with these rules are at your own
risk. Neither the manufacturer, importer, nor the supplier may be held liable.
Always operate blender jar with the cover in place.
Never leave your blender unattended while running.
The use of attachments, including canning jars, not recommended by the
manufacturer may cause a risk of injury to persons
Risk of thermal burn injury due to excessive pressure in the container. Do not blend
hot liquids.
Loading ...
Loading ...
Loading ...