Loading ...
Loading ...
Loading ...
O INSTALL THE AIR CONDITIONER IN THE
WINDOW
• Carefullylifttheair conditionerand slideitintothe open
window.Make surethebottomguideof theair
conditionerdropsintothe notchesofthe Lbrackets.
• When theairconditionerdropsintothe Lbrackets,the
air conditionerwillbe centeredinwindowopeningas
shownin FIG. 7.
• While steadyingthe airconditioner, carefullybringthe
windowsashdownbehindthe upperguideof the air
conditioner,as shownin FIG.8.
m
\ i
CENTER LINE FIG. 7
W1NOOWFRMAE_...
UPPERGUIDE_ _STRIP 1
ABOUT 1/4_
m SECURE THE GUIDE PANELS
FIG. 8
Extendthe guidepanels(ITEM F) tofillthe window
openingusing4 screws(ITEM B)to securethem,as
showninFIG. 9.
[_J INSTALL THE FOAM SEAL AND SASH LOCK
• Cut the foamseal(ITEM E) tothewindowwidth.
Stuffthefoam sealbetweenthe glassand the windowto
preventairand insectsfromgettingintothe room,as
shownin FIG. 9.
• Fastenthe remainingL bracketoneithersideofthe
windowusingscrew (ITEM A).See FIG. 9 inset.
Installingthisbracketpreventswindowfrombeing raised
whichmay resultinunitfalling.
• Removethe screws thatsecurethe cabinetand base
pan inthe rightside.
• Attachthe supportbracket(ITEM H) inthe innerwindow
sillwitha screw (ITEM B),as shownFig. 10.
FIG. 10
I_'] IF AIR CONDITIONER IS BLOCKED BY STORM
WINDOW FRAME
• If storm windowpresents interference,fastena 2" wide
woodstdp to the innerwindow sillacross the full width of
the sill. The wood stripshouldbe thick enough to raise
the height of thewindow sill so that the unit canbe
installedwithout interferencefrom the the storm window
frame. See FIG. t 1.
Top of wood stdpshould be approximately 3/4" higher
than the storm window frame to help condensation to
drain propedy to the outside.
• Install a second woodstdp(approximately 6" long by
11/2"wideandsame thickness as firststdp)in the center
oftheoutersillflush againstthe beck ofthe innersill.
Screwthe Lbrackets intothis stdp.
Thiswillraisethe L bracket as shownin FIG. 11.
WOOD STRIP MOUNTED 1' MAX.
ON TOP OF tNNER'SILL -_- 3/4"
INNE_ FRAME
OUTER
SILL
N,SIO FIG. 11
REMOVAL FROM WINDOW
Turnthe air conditioneroff,and disconnectthe bower
cord.Removethe L bracketandthe screws installed
throughthetopand bottomofthe guidepanels,and save
for reinstallationlater. Closethe guidepanels.Keepinga
firmgdp_n theairconditioner,raisethe sash,and
carefullytiltthe airconditionerbackward,drainingany
condensatewater. Liftthe air conditioner fromthe window
and removethe foam sealfrom between thewindows.
L BRACKET
FIG. 9
• Airconditionerscoveredinthismanualposean
excessiveweighthazard.Twoormorepeopleare
neededtomoveandinstalltheunit.
To preventinjuryorstrain,useproperliftingand
carryingtechniqueswhenmovingunit.
• Whenhandlingtheairconditioner,becarefultoavoid
cutsfromsharpmetalfinsonfrontandrearcoils.
• Makesureairconditionerdoesnotfalldudngremoval.
-7-
Loading ...
Loading ...
Loading ...