Loading ...
Loading ...
Loading ...
MAINTENANCE
HOW TO REPLACE
THE MOTION DRIVE BELT
REMOVAL
1. Remove the mower housing. See the instructions on "How To
Remove The Mower Housing".
2. Completely push the pedal forward and engage the parking
brake.
3. Remove the idler pulley (Figure 29).
Motion
Drive Belt
/
Drive Pulley
Shift
Link uster Nut
Bracket
8.
Figure 31
To remove the motion drive belt from the stack pulley, pull the
front end of the belt under the stack pulley and then back
between the stack pulley and the steering plate (Figure 32).
I 1/' l| Figure 29
4.
To access the belt guides, remove the battery and battery tray.
See "How To Remove The Battery".
5. Loosen the belt guides at the drive pulley (Figure 30).
Seat Spring
Belt Guides Figure 30
6.
7.
Remove the motion drive belt from the drive pulley
(Figure 29).
Remove the adjuster nut from the shifter bracket (Figure 31 ).
Pull the motion drive belt over the shifter bracket.
Stack Pulley _-_1 _ Steering
_-/-_ _ __ Plate
I_DBle_t_ _ BeltGuides
Figure 32
9. Remove the access panel (Figure 33).
10. Remove the two screws that attach the steering shaft
assembly (Figure 33). Raise the steering wheel and steering
shaft assembly. Pull the motion drive belt under the steering
shaft assembly.
/
'Steering Shaft
Assembly
Motion Drive
Belt
AccessPanel Figure 33
11. Remove the motion drive belt. A correct replacement part or
assistance is available from an Authorized Service Center in
your area.
F-000811L 29
Loading ...
Loading ...
Loading ...