Loading ...
Loading ...
Loading ...
.aw to Set Oven for Cleaning
Quick Reminder:
1. Press the AUTO SELF CLEAN pad.
2. Press the INCREASE or DECREASE pad
until the desired Clean Time appears.
I1"the oven is too hot and you start to set a clean
cycle, the word • 'OFF* will appear in the display.
Allow additkmal time for cooling before you try to
set the cycle.
1. Follow the directions in the Before a Clean
Cycle section.
2. fter closing the door, press the AUTO
SELF CLEAN pad.
3. Press the INCREASE or DECREASE
pad until the desired Clean Time is
displayed.
_ Clean Time is normal]y 3 hours. You can
change the Clean Time to any time between
2 and 4 hours, depending on the amount of
soil in your oven.
The self-clean cycle will automatically begin after
"CLEAN" is displayed and the time for the clean
cycle is set. The words "ON" and "LOCK" will
appear in the display when the door automatically
locks. It will not be possible to open the oven door
until the temperature drops below the lock
temperature and the LOCK light goes off.
4. When the LOCK light is off, open the door.
NOTE:
• You can find out when the clean cycle
will be finished by pressing the STOP
I T_ME1 TIME pad.
• The word "clean" will be displayed, the word
"DOOR"' will flash and oven control will signal if you
set the clean cycle and forget to close the oven dc×)r.
• A fan ,nay automatically turn on and off to cool
internal parts. This is normal, and the fan may
continue to run after the oven is turned off.
To Stop a Clean Cycle
1. Press the CLEAR/OFF pad.
2. When the LOCK light goes off, indicating thatthe
oven has cooled below the locking temperature,
open the door.
After Self-Cleaning
You may notice some white ash in the oven. Just wipe
it up with a damp cloth after the oven cools.
If white spots remain, remove them with a soap-filled
steel wool pad. Be sure to rinse thoroughly with
a vinegar and water mixture. These deposits are
usually a _lt residue that cannot be removed by the
clean cycle.
If the oven is not clean after one clean cycle,
repeat the cycle.
if the shelves become hard to slide, wipe the shelf
supports with cooking oil.
NOTE: No functions can be programmed before the
door automatically unlocks.
(continued next i_lge)
0"7
z_. I
Loading ...
Loading ...
Loading ...