Loading ...
Loading ...
Loading ...
10 / EN
Dryer / User Manual
3 Installation Instructions
A
WARNING -
Risk of fire
• The clothes dryer (“appliance‘)
installation must be performed by a
qualified installer.
• Install the appliance according to the
manufacturer’s instructions and local
codes.
• Do not install a clothes dryer with
flexible plastic venting materials. If
flexible metal (foil type) duct is installed,
it must be of a specific type identified by
the ap pliance manufacturer as suitable
for use with clothes dryers. Flexible
venting materials are known to collapse,
be easily crushed, and trap lint. These
conditions will obstruct the clothes
dryer’s airflow and increase the risk of
fire.
• To reduce the risk of severe injury
or death, follow all installation
instructions.
3.1 Electrical connection
Connect the appliance to a grounded outlet
protected by a fuse or circuit breaker of
suitable capacity.
4-wire receptacle
(14 -30R)
3-wire receptacle
(10 -30R)
If yo u have 3-wir e receptacle, like
this , a 3-wire dryer cord must be
purchased locall y.
Dryer shipped with cord to fit this
type 4 -wire receptacle
C
Neutral conecction is not used in
this product
Power Cable
3-Wire Electrical Connection
If your receptacle is a 3-wire receptacle
as shown below, you must obtain a 3-wire
dryer cord. A dryer cord can usually be found
at your local hardware supply, electrical
supply or home center. Cord should have
closed loop or upturned end wire terminating
connectors. The cord kit must be marked
“For Use with Clothes Dryers”.
3- wire receptacle
( 10-30R)
Typical 3- Wire Dryer Cord 240V/30 amp
NEMA 10-30 Type SRDT
A
If the dryer is installed in a
mobile home, recreational
vehicles, new branch-circuit
installations or in areas where
local codes do not permit
grounding through the neutral
conductor, only a 4-wire power
supply cord shall be used.
Loading ...
Loading ...
Loading ...