Loading ...
Loading ...
Loading ...
EN 12
Fig. 1
• The socet is earthed and in compliance ith the la.
• The socet can ithstand the maimum poer load of the appliance, as
indicated on the nameplate of the refrigerator.
• The poer suppl voltage is ithin the amounts indicated on the
nameplate of the refrigerator.
• The cord must not be folded or compressed.
• The cord must be checed regularl and replaced solel b authorized
technicians.
• The manufacturer declines an liabilit henever these safet
measures are not respected.
Remove all rapping/pacaging present inside the appliance and clean
ith ater and baing soda or neutral soap.
After the installation, ait 2 - 3 hours to allo time for the refrigerator/
freezer to stabilize at normal oring temperature, before placing fresh
or frozen foods inside.
If the poer cord becomes disconnected, ait at least five minutes
before restarting the refrigerator/ freezer. At this point, the appliance is
read for use.
• The temperature adustment of both compartments is effected b
rotating the thermostat nob (Fig. 1).
Select the desired position:
• For colder temperature in the freezer, b turning
toards 5.
• For temperature less cold in the refrigerator and in the freezer, b
rotating in the direction of OFF.
ARNINS:
• Do not install the appliance in a damp or et location as this could
compromise the insulation and result in leaage.
Furthermore, on the eterior of the same, condensate could accumulate
• Do not place the appliance in locations outside or near sources of heat
or eposed to direct sunlight.
The appliance operates properl ithin the range of environmental
temperatures indicated:
+10 +32’C for the climatic class SN
+16 +32’C for the climatic class N
+16 +38’C for the climatic class ST
+16 +43’C for the climatic class T
(See the nameplate of the product)
• Do not place containers ith liquids on top of the appliance.
• ait at least 3 hours after final placement before placing the appliance
in operation.
After shipping, place the appliance verticall and ait at least 2 - 3 hours
before connecting it to the electrical sstem. efore inserting the plug
into the electrical socet, mae sure that:
Appliance start-up
Temperature adjustment
(no display)
OPERATION
Electrical connection
INSTALLATION
~
This appliance is mared according to the European directive
2012/19/EU on aste Electrical and Electronic Equipment (EEE).
EEE contains both polluting substances (hich can cause negative
consequences for the environment) and basic components (hich
can be re-used). It is important to have EEE subected to
specific treatments, in order to remove and dispose properl all
pollutants, and recover and reccle all materials.
Individuals can pla an important role in ensuring that EEE does not
become an environmental issue; it is essential to follo some basic rules:
- EEE should not be treated as household aste;
- EEE should be handed over to the relevant collection points
managed b the municipalit or b registered companies. In man
countries, for large EEE, home collection could be present.
In man countries, hen ou bu a ne appliance, the old one ma be
returned to the retailer ho has to collect it free of charge on a
one-to-one basis, as long as the equipment is of equivalent tpe and
has the same functions as the supplied equipment.
placing the mar on this product, e are confirming
compliance to all relevant European safet, health and environmental
requirements hich are applicable in legislation for this product.
Scrapping old appliance
Conformit
Loading ...
Loading ...
Loading ...