Loading ...
Loading ...
Loading ...
Operating Your Dryer
Rear Control Models
Front Control Models
DRY2791N_SVG
WARNING
To reduce the risk of fire, electric shock, serious in-
jury or death to persons, read the Safety Information
section before operating the dryer.
W520
Digital Display
The two-digit display is used to show the time remaining in a
cycle.
When the control is powered off, the right-most decimal in the
display will flash every one to five minutes to indicate that the
machine is in Idle Mode.
The display also shows diagnostic codes.
Idle Mode
If no keypads have been pressed for five minutes after a cycle
is finished, the control will enter Idle Mode. A light in the lower
right corner of the digital display will flash every one to five mi-
nutes. Press the Power/Cancel keypad to exit this mode and
power the display for cycle/option selection. This light will flash
again after five minutes when it re-enters Idle Mode.
Cycles
The following cycle descriptions will help determine which cy-
cle to choose depending on the type of laundry being dried.
The cycle settings may be modified using the Selections and
Options.
Auto-Sensing
The Auto-Sensing drying cycle operation is determined by the
type of cycle selected as well as the moisture sensing system,
which can be set by changing the Dryness setting. Auto-Sens-
Operating Your Dryer
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
10 Part No. D516900EN
Loading ...
Loading ...
Loading ...