Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/83618725-9114832992/bgd.png)
f
h
BAKE:
1. Press BAKE. "BAKE" will flash and (- - -°) will
appear In display.
2. Press [] . The display will show 150° the first
time power is supplied to the oven.'The display will
show the last used bake temperatu re the next time
you set BAKE.
NOTE: The display will show ON and the oven
temperature as the oven heats up. When
the oven reaches the set temperature a
tone will sound. See Fig. 6.
To change the temperature during a BAKE cycle_
repeat steps 1.2 under BARE. After Bake is
finished press CLEAR/OFF.
AUTOMATIC OVEH OFF:
You can begin baking now and set the oven to turn off
automatically,
1. Press COOK TIME (how long food is to cook),
2, Pressr_or [] to set how long you want to bake.
3, Press BAKE.
4. Select temperature using _ or [_.
See Fig, 7,
NOTE: You should consider that food will
continue to cook after controls turn off
the oven unless you remove the hoed
immediately,
AUTOMATIC OVEN ON AHD OFF:
You can set the oven to turn on and off automati.
caHy= The control will calculate the time to start
cooking.
t. Press COOR TIME. (How long food is to cook).
2. Press _-]or r_ to set how long you want to bake.
3o Press STOP T_E. The earliest stop time you can
set will appear tn the display.
4, Set STOP TnME (the time of day when you want
the oven to turn off) using _ or _ ,
5. Press E;AKE,
6. Select temperature using_] or_].
See
Fig,
8,
The low temperature zone of this range I
_ between 150°F and 200°F} is available 1
to keep hot cooked foods warm, Food I
kept longer than two hours at these low
temperatures may spoil,
Fig. 6
Never let food such as dairy prod-
ucts, fish, meat, poultryj etc._ sit
for more than 1 hour before cook-
ing starts, when you set your oven
for a delay start. Room tempera-
ture promotes the growth of harm-
fu_ bacteria, Be sure the oven light
_s off because heat from the bulb
wilg speed bacteria growth=
NOTE: if centre! beeps, you have not completed
your timed oven setting, Complete the
setting or press CLEAR/OFF and start
again with Step 1.
Fig. 7
Fig. 8
12 NCCTL08-1
Loading ...
Loading ...
Loading ...