Loading ...
Loading ...
Loading ...
2.10 AIR HANDLING PARTS
2.10.1 AIR GUIDE AND BLOWER
1, Remove the front grille. (Refer to section 2.9.1)
2. Remove the cabinet, (Refer to section 2.9.2)
3. Remove the control box. (Refer to section 2.9,3)
4. Remove the 4 screws which fasten the brace,
5. Remove the brace.
6. Remove the 2 screws which fasten the evapora-
tor.
7. Move the evaporator high side forward and pulling
it upside slightly. (See Figure 44)
8. Move the evaporator sideways carefully.
9. Pull out upside hook of orifice by pushing the tabs
and remove it. (See Figure 45)
10. Remove the clamp with hand plier which secures
the blower.
11. Remove the blower.
12. Remove the 4 screws which fasten the air guide
from the barrier.
13. Move the air guide backward and pulling out
from the base pan
14. Re-install the components by referdng to the
removal procedure, above.
Figure 44
/
Figure 45
2.10.2 FAN
1. Remove the cabinet. (Refer to section 2.9.2)
2. Remove the brace (Refer to section 2.10.1)
3. Remove the 4 screws which fasten the condenser.
4. Move the condenser sideways carefully.
5. Remove the clamp which secures the fan.
6, Remove the fan. (See Figure 46)
7. Re-install by referdng to the removal procedure.
Figure 46
--21--
Loading ...
Loading ...
Loading ...