Loading ...
Loading ...
Loading ...
Live Smart, Better Life!
03
15. To avoid contamination of drink, please respect the following instructions:
• Opening the door for long periods can cause a significant increase of the
temperature in the compartments of the appliance
• Clean regularly surfaces that can come in contact with drink and
accessible drainage systems
• Clean water tanks if they have not been used for 48h; flush the water
system connected to a water supply if water has not been drawn for 5 days
• If the refrigerating appliance is left empty for long periods, switch off,
defrost, clean, dry, and leave the door open to prevent mould developing
within the appliance
Note:
This appliance contains flammable refrigerant R600a and foaming agent
cyclopentane.
Please avoid contact fire when you transport and use it.
Please ask professional for servicing when the machine broke down.
Please send it to your local appointed disposal station when you discard it.
Installation Instructions
1. This wine cooler is designed to be free standing only, and should not be
recessed or built-in.
2. Place the wine cooler on a floor that is strong enough to support it when
fully loaded. To level the wine cooler, adjust its leveling legs at the bottom.
3. Leave 6” of space on the top, the back and sides of the wine cooler, which
allows proper air circulation to cool the compressor and condenser.
4. Locate the cooler away from direct sunlight and sources of heat (stove,
heater, radiator, etc.). Direct sunlight may affect the acrylic coating and heat
sources may increase electrical consumption. Extreme cold ambient
temperatures may also cause the unit not performing properly.
5. Avoid locating the cooler in moist areas.
6. Plug the unit into an exclusive, properly installed-grounded wall outlet. Do
not under any circumstances cut or remove the third (ground) prong from the
power cord. Any questions concerning power and/or grounding should be
directed toward a certified electrician or an authorized products service center.
7. After plugging into a wall outlet, allow the cooler to cool down for 2-3 hours
before placing any items in the compartment.
www.thermomate.com
Loading ...
Loading ...
Loading ...