Loading ...
Loading ...
Loading ...
7
SETTING THE DIGITAL CLOCK
1. In standby mode, press and hold the MEM / CLK button. The “12H” will blink.
2. Press the MEM / CLK button. The hour time digits will blink.
3. Press the TUN+ / SKIP+
or TUN- / SKIP- button to set the current hour.
Press and hold the button for fast to setting. Press the MEM / CLK button again
to confirm and the minute time digits will blink.
4. Press the TUN+ / SKIP+
or TUN- / SKIP- button to set the current minute.
Press and hold the button for fast to setting.
5. Press the MEM / CLK button again and confirm the current time is set.
NOTE: The PM icon will light when the hour is set in the PM
SETTING TIMER
In any mode, press the TIMER button, the TIMER icon with time “180” will displayed
and flash.
1. Press the TIMER button again, the timer time will count down 10 minute. Repeat
to press this button to adjust the timer in decrements of 10 minute.
2. Press the TUN+ / SKIP+
or TUN- / SKIP- to adjust the timer in increments
/ decrements of 1 minute. Press and hold the button for fast to setting.
3. After the set time is reached, the SKCR2810BT alarm will sound.
4. To cancel the alarm after it has sounded, press the
button.
BLUETOOTH OPERATION
ABOUT PAIRING
Pairing is the term used when two Bluetooth devices are connected wirelessly for
the first time. This allows the devices to see each other and sets up a one to one
communication channel between both devices.
To begin pairing with a Bluetooth device
1. Press the
button to turn on the unit.
2. Press the SOURCE button to select Bluetooth function and the icon
will
displayed and flash on LCD, you will hear the melody and start pairing process to
connect to your Bluetooth device.
3. Turn on Bluetooth function of your device and enable the search or scan function
to find SKCR2810BT (see your device’s instructions to add or setup a Bluetooth
device).
4. Select SKCR2810BT from the device list when it appears on you device screen.
If required, enter the pass code “0000” to pair (link) SKCR2810BT with your
device.
5. Once paired with a device, the icon
will light steadily and your will hear the
sound “DOM” to confirm that pairing is tone beep sound confirms that pairing is
Downloaded from www.ManualsFile.com manuals search engine
Loading ...
Loading ...
Loading ...