Loading ...
Loading ...
Loading ...
Getting through narrow spaces
If your refrigerator will not fit through an entrance area, you can reduce its size by removing the doors. Check first by
measuring the entrance.
Required Tools
You will need the following tools:
Top Hinge Top Hinge TOOLSNecessary:
Cover Front Cover Rear
Screw _ _ Screw
Top ScrewU Phillips l_ Head
AND
3/8" Fixed
Wrench
To prepare for removing the doors;
c°wr_
1 Make sure the electrical power cord is unplugged from the wall
outlet.
2
3
4
Open both doors and remove the toe grille (as explained in the
[nstallation [nstructions that came with your appliance).
Remove any food from the door shelves.
Close the doors.
To remove the refrigerator top hinge cover:
1 Remove the three screws from each cover over the top door
hinges.
2 Lift hinge cover straight up and off.
To remove the refrigerator door=
1 Trace lightly around the door's top hinge with a pencil. This
makes reinstallation easier.
2 Remove the two screws from the top hinge. Lift the door off of
the bottom hinge and set it aside.
3 Remove the two bottom hinge screws and hinge if necessary,
Adjustable Hinge
(some models)
Door
Non=Adjusting Hinge
(some models)
Be sure doors are set aside in a secure position
where they cannot fall and cause personal injury.
To reinstall the refrigerator door, reverse the above steps.
Loading ...
Loading ...
Loading ...