Loading ...
Loading ...
Loading ...
READ AND UNDERSTAND ALL INSTRUCTION, WARNING, AND DANGER LABELS.
PARA INSTRUCCIONES EN ESPAÑOL, REFIÉRASE AL MANUAL DEL OPERADOR.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL
THOROUGHLY AND FOLLOW THE IMPORTANT SAFE OPERATION PRACTICES
BEFORE OPERATING.
Need Help?
www.CRAFTSMAN.com
or Call 1-888-331-4569
CRAFTSMAN® is a registered trademark of Stanley Black & Decker, Inc., used under license.
© 2019 CRAFTSMAN U.S. & Canada Only
CRAFTSMAN.com
- 4 -
Make sure the spark plug boot is
connected to the spark plug before
attempting to start.
Fuel Valve (if equipped):
Rotate the fuel valve into
the OPEN position
Spark plug located
on the front of
most engines
A
B
C
4
5
6
7
8
NOTE: For battery pack installation,
refer to Operator’s Manual.
Insert plastic electric starter push key
into starter housing.
Standing behind the mower, pull the
blade control back against the upper
handle. While holding the blade
control, push the electric starter push
key to start the engine.
NOTE: Electric starter is equipped with
an internal circuit breaker. If unit fails
to start when starter button is
depressed, wait one minute for breaker
to reset, then attempt to start again.
While standing behind the mower, pivot the blade control gainst the
upper handle.
Grasp the recoil starter rope handle and pull with quick, full-arm
stroke. If the engine does not start after three pulls, wait a few
minutes and repeat.
Electric Start System (if equipped)Recoil Start (all models)
A
A
B
B
C
9
A. Hold the blade control against the
upper handle.
B. Slowly pull recoil starter rope handle
from engine and slip starter rope into
the rope guide.
C. Tighten rope guide wing knob.