Loading ...
Loading ...
Loading ...
operation en
31
12.12 Condensation con-
tainer
Condensation forms during drying,
which your appliance uses for auto-
matic cleaning. By default, the con-
densation is collected in the appli-
ance's condensation container.
Note:Operate this appliance using
the water drain hose provided. If you
connect the water drain hose
→Page14, you do not have to regu-
larly empty the condensation con-
tainer →Page31.
Emptying the condensation
container
If the drying programme has finished
or the display shows a notification
while the appliance is in operation,
empty the condensation container.
Requirements
¡ The display shows the following
after drying: "End"
¡ or during operation: .
1. Pull out the condensation con-
tainer, keeping it level.
2. Empty the condensation container.
Make sure that you insert the con-
densation container before operat-
ing the appliance.
→"Inserting the condensation con-
tainer", Page31
Inserting the condensation
container
Requirement:The condensation con-
tainer →Page31 is removed from
the appliance.
▶
Push the condensation container
in as far as it will go.
Loading ...
Loading ...
Loading ...