Loading ...
Loading ...
Loading ...
18
noitpircseDtraP
reporp rof ylkeew retlif ekatni ria naelC .rood nevo woleb detacol si retliFretliF ekatnI riA
airow. Wash lter in hot water and mild detergent. Do not use oven
without lter in place. Remove lter to clean.
Important
To avoid overheating and oven damage, clean air lter regularly.
1. Grasp lter tab and pull forward. Filter will release from retaining clips.
2. To reinstall, place bottom of lter in clips and push top of lter into
position.
morf annetna dna ytivac nevo evaworcim fo pot speek dleihs rettalpSsdleihS rettalpS
becoming soiled. Clean soil from shield with damp cloth or clean with mild
detergent and water. Remove splatter shield for easy cleaning.
Removing Splatter Shield
1. Unplug oven before removing splatter shield to stop antenna from
rotating.
2. Place ngers behind shield, pull forward, and down.
• When removing and replacing splatter shield, be careful not to bend
antenna.
• If a gap for ngers behi
nd splatter shield does not exist, push up on
splatter shield front. Splatter shield may not be installed fully and
cannot be removed until splatter shield front is properly installed.
3. Reinstall splatter shield by placing front tabs over lip at top of oven
cavity front. Lift back of shield until shield snaps into place.
4. Reconnect power to oven.
Changing Oven Light Bulb
Important
To avoid burns and cuts, wear gloves to protect hands should bulb
break. If hot, allow bulb to cool.
Tools and Bulb
• Protective gloves
• Standard screwdriver or ¼-inch socket
• Light bulb rated 120 volt, 25 watt
1. Unplug oven.
2. Remove screw from side of oven.
3. Remove bulb by turning counterclockwise, being careful not to burn
ngers or break bulb.
• Replace with bulb rated 120 volt, 25 watt.
4. Reconnect power to oven.
Shield
up side down
Shield in
correctly
Loading ...