Loading ...
Loading ...
Loading ...
11EASTOAK.COM 3000W ARCH DESIGN ELECTRIC HEATER
• Don’t move or cover the heater while it is working.
• THIS IS NOT A TOY, DO NOT CLIMB.
• Plug in power, and turn on the heater to check if the heater can
work well.
• Pay attention to the mounting place and all mounting material
(dowels, screws). Ensure they are suitable and stable enough for
mounting and lastingly holding the appliance.
• Please note that the appliance installation must not add excessive
wind load.
• Adjust the desired angle of radiation and fest screw all screws.
• Check regularly the screw’s connection. Mechanical bearing
pressure and oscillation due to wind or rain could lead to loose.
• Connect the plug to the socket.
• Turn on the switch and connect the power to check if the heater can
work well.
• Plug in the power source and operate the remote control. Then
observe whether the appliance works trouble-free during the rst
10-15 minutes.
• If you do not use it, please remove the battery socket.
Loading ...
Loading ...
Loading ...