Loading ...
Loading ...
Loading ...
Option1, Countertopattachment
The dishwasher must be secured to the cabinet.There are
two brackets on top of the
dishwasher that can be brackets
attached to the countertop if it
is wood, laminate or another
similar surface. If your
countertop is marble, granite
or other hard surface, these
brackets will not be used.
They need to be removed and
discarded front vent
NOTE: Do not attach the model shown
dishwasher, this will be done
later.
Option 2, Dishwasher side attachment
for marble granite or other hard surface
countertop
1. Remove the brackets from the top, by flattening tab at
back of brackets with pliers, and pulling the brackets
out of the slots.
/
tabs
2. With another person holding the rear of the dishwasher
to prevent it from tipping, open dishwasher door, and
place towel over pump assembly and spray arm of
dishwasher.This will prevent screws from falling into
pump area when securing dishwasher to cabinet.
3. Push the side mount bracket into the slot on the side of
dishwasher, and bend tab in towards the side of the
dishwasher so that it keeps the bracket in place. Repeat
this step for the other side of the dishwasher.
NOTE: Do not attach the dishwasher, this will be done
later.
bend i
tabs_
Move dishwasher into cabinet opening
1.
2.
3.
4.
5.
Using two or more people, stand the dishwasher up.
Grasp the sides of the dishwasher
at the edges of the door panel.
Tilt dishwasher backwards on
wheels and move dishwasher close
to cabinet opening. Do not push on
the front of the panel or on the
console--they may dent.
If dishwasher has a power supply cord, insert power
supply cord into hole cut into cabinet.
If using direct wire, check that it is on the right front
side of opening.
Check that water line is on the left side of opening and
drain hose is near the center of the hole in the cabinet.
6.
Slowly move dishwasher completely into cabinet
opening. Do not kink or pinch copper tubing, drain
hose, power supply cord or direct wire between
dishwasher and cabinet.
HelpfulTip: Once the dishwasher is in position, you
may have to support the front of the dishwasher by
raising, lowering or shimming front feet.
Remove cardboard from under dishwasher.
NOTE: It is all right if dishwasher fits tightly into cabinet
opening. Do not remove insulation blanket --the blanket
reduces the sound level.
Check door spring tension
With another person holding the dishwasher to prevent it
from tipping, open and close the door a few times. If the
door closes or falls open under its own weight, the door
tension will need to be adjusted.
• If the door closes too quickly, decrease the spring
tension by moving the spring end toward the front of
the dishwasher.
• If the door falls open, increase the spring tension by
moving the spring end toward the back of the
dishwasher.
• Springs should be in the same notches on left and
right sides.
spring move
spring end
10
Loading ...
Loading ...
Loading ...