Amana AFD2535FES0 refrigerator

User Manual - Page 13

For AFD2535FES0.

PDF File Manual, 88 pages, Download pdf file

Loading ...
Loading ...
Loading ...
IceundWuter
Automatic Ice Maker
(select models)
Connect the ice maker to the water supply as
instructed on pages 6-7. Proper water flow and a
level refrigerator are essential for optimal ice
maker performance.
Operating Instructions
Confirm ice bin is in place and ice maker arm is
down.
After freezer section reaches
between 0 ° to 2° F (-17 ° to -16 ° C),
ice maker fills with water and begins
operating. You will have a complete
harvest of ice approximately every
three hours.
Allow approximately 24 hours after
installation to receive first harvest of ice.
Discard ice created within first 12 hours of operation
to assure system is flushed of impurities.
Stop ice production by raising ice maker arm until
click is heard.
Ice maker will remain in the off position until arm is
pushed down.
The first one or two batches will probably contain
undersized and irregular cubes because of air in the
supply line.
When the ice cubes are ejected it is normal for
several cubes to be joined together at the ends. They
can easily be broken apart. The ice maker will
continue to make ice until the supply of ice cubes
raises the ice maker arm, shutting the ice maker off.
Certain sounds may accompany the various cycles of
the ice maker. The motor may have a slight hum, the
cubes will rattle as they fall into an empty storage bin
and the water valve may click or "buzz" occasionally.
If the ice is not used frequently, the ice cubes will
become cloudy, shrink, stick together and taste stale.
Empty the ice storage bin periodically and wash it in
lukewarm water. Be sure to dry the bin thoroughly
before replacing it.
Beverages and foods should not be placed in the ice
storage bin for quick chilling. These items can block
the ice maker arm, causing the ice maker to
malfunction.
Turn off (arm up) the ice maker when the water
supply is to be shut off for several hours.
To Remove the Ice Bin:
Pull it forward, away from the ice maker. To avoid the
ice maker dumping ice while the bin is removed, turn
the ice maker off by raising the ice maker arm.
To Install the Ice Bin:
Reverse the above procedure. Turn the ice maker on
by lowering the ice maker arm.
To Dispense Water:
Hold container under spout and
press dispenser pad.
Water Dispenser (select models)
The Water Dispenser is located on the
left side wall of the fresh food section. _Tb-_l
This design is for cold water
dispensing only.
12
Loading ...
Loading ...
Loading ...