Loading ...
Loading ...
Loading ...
Aboutthe automatic icemaker.
A newly installed refrigerator may take 12 to 24 hours to begin making ice.
Automatic Icemaker
On dispenser models,
to access ice or reach
the power switch:
o Lift the bin, then pull it
forward until the bin stops.
Lower the bin to access ice
or reach the power switch.
NOTE:In order to take full advantage
of the tilt-out ice bin, only store items
on the shelf below the ice bin that
are no taller than the Iowest point
on the bhT.
The icemaker will produce seven cubes
per cycle---aI)I)roMmately ] 00-130 cubes
in a 94-hem" period, depending on fl'eezer
COilli)ai'tulent teilll)ei'attH'e _ i'OOill
temperatm'e, nmnber ot door openings
and other use conditions.
If the reti_igerator is operated betore the
water connect.ion is made to the icemaket;
set the power switch in the 0 (Off)position.
When the reti-igerator has been com_ected
to the water suI)I)ly, set the power switch to
the I (on) position.
The icemaker will fill with water when it
cools to ] 5°F (-10°(7). A newly installed
refi{gemtor may take 12 to 24 hems to begin
making ice cubes.
You will hear a buzzing sotmd each time
the icemaker fills with water
Throw away the first troy batches of ice to
allow the water line to clea_:
Special note about dispenser models:
Dispenser models have a tilt-out ice bin.
The bin can be tilted out as shown in the
illustrations, and it will hold itself up
while you take ice ()tit or ttlFn the
icemaker power switch on and off'. Be
sm'e to put the bin back in place before
closing the doo_:
To restore your ice level from an empty
bucket stage, the following steps are
recommended:
12 hom_ after the fi_t batch of ice
has fidlen into the bin, dispense
3 to 4 cubes.
@ _MteI" an additional 6 hom_, dispense
3 to 4 cubes again.
These steps will restore your ice level
in the shortest amount of time.
Be sm'e nothing interteres with the sweep
of the teeler amL
]cemaker
f
X'_hen the bin fills to the lexel of the teeler
am_, the icemaker will stop producing
ice. It is nom_al fi)r sexeral cubes to be
joined together:
Green
If ice is not t/se(l fl'eqtlenfl}; old ice cubes PowerLight FeelerArm
will become cloudy, taste stale and shrink.
NOTE:/n homes with lower-than-averagewater
pressure,you mayhear the icemakercycle multiple
times when mak/bg onebatch of ice.
o Lift thebin, thenpull it
forward untilthebin stops.
Removing Ice Bin (dispensermodels)
before removing the bin.
When replacing the bin, be sure to press it
fimfl) into place. If it does not go all the
wax back remoxe it and rotate the dfixe
mechanism 1/4 ttlFn. Then push the bin
back again.
CAUTlON: The ice bin is heavy when full.
thel,o,,e,swit,htotheO l,ositi..
Dispenser Models only
Lift and pull forward again
to remove the bin.
14
Loading ...
Loading ...
Loading ...