Loading ...
Loading ...
Loading ...
MAINTENANCE
35
Louver
Bottom plate
Deflector assembly
Clean the
filter screen
Opposite to the
direction of taking
out the filter screen
Take out the filter
screen from the unit
Clean the filter screen with
soapy water and air dry it
Replace the filter
Tip: When you find accumulated dust in the filter screen, please clean the filter screen in time to ensure the clean,
healthy and efficient operation inside the air conditioner.
Cleaning
of inner
air duct
Service
and
maintenance
When the air conditioner is not in use for a long time, do the following work:
Take out the batteries of the remote controller and disconnect the power supply of the air conditioner.
When starting to use after long-term shutdown:
1.Clean the unit and filter screen;
2.Check whether there are obstacles at the air inlet and outlet of indoor and outdoor units;
3.Check whether the drain pipe is unobstructed;
Install the batteries of the remote controller and check whether the power is on.
First, loosen the knob on the middle of louver and bend outwards to take it out.
Then, grasp both sides of bottom plate push downwards to take down the bottom plate.
Finally, buckle of deflector assembly with your thumb and take it out.
Wipe the air duct and fan assembly with a clean and wrung wet rag.
Clean the removed parts with soapy water and air dry it.
After cleaning, restore the removed parts in turn.
the louver
loosen the
Clean
the unit
Disassembly
and
assembly
of
filter screen
When cleaning, you must shut down the machine and cut off the power supply for more than 5 minutes.
Under no circumstances should the air conditioner be flushed with water.
Volatile liquid (e.g. thinner or gasoline) will damage the air conditioner , so only use soft dry cloth or
wet cloth dipped with neutral detergent to clean the air conditioner.
Pay attention to cleaning the filter screen regularly to avoid dust covering which will affect the filter screen
effect. When the operating environment is dusty, the cleaning frequency should be increased appropriately.
After removing the filter screen, do not touch the fins of the indoor unit to avoid scratching.
Tip: Wipe frequently to keep air conditioner clean and good appearance .
Plastic handle
wring it dry
Gentle wipe
the unit surface
Grasp the raised plastic handle on the filter screen by hand, and then pull the filter screen out in the direction
deviating from the unit, so that the upper edge of the filter screen is separated from the unit.
The filter can be removed by lifting the filter upwards.
When installing the filter screen, first insert the lower end of the filter screen into the corresponding position
of the unit, and then squeeze the upper end of the filter screen into the corresponding buckling position of the
unit body.
Loading ...
Loading ...