Loading ...
Loading ...
Loading ...
04
Troubleshooting
Blinks once
Keeps
blinking
fastly
Keeps
blinking
slowly and
regularly
Lights on
Lights o
Lights o
LED Light 1
(Green)
Blinks once
Lights o
Lights o
Lights o
Blinks once
eve 2
seconds
Blinks twice
eve 2
seconds
LED Light 2
(Red)
Initial Status
To Be
Connected
Normal
Charging
End of
Charging
Abnormal
Communication
Undeoltage
Functions
Power on or reset. The relay
is "o".
The voltage of Detection Point 1
is 12V, and the relay is “o”.
The voltage of Detection Point 1
is 6V, and the relay is “on”.
The voltage of Detection Point 1
is 9V, and the relay is “o”.
The voltage of Detection Point 1
is abnormal (that is, the voltage
value is not one of the following
values: [6±0.8]V, [9±0.8]V,
[12±0.8]V), the charger enters
the protection status. When the
voltage at Detection Point 1 is
back to normal, the charger will
return to its normal working
state.
When the voltage is no more
than 75V±10V for 0.1 second,
the power output will be
stopped. When the voltage rises
to 90V±10V, the charging system
will sta again after a 5-second
delay.
Denition
Stop Charging
1. Disconnect the Type 1 plug from the vehicle inlet（Figure 4）.
2. Disconnect the power plug from the outlet（Figure 5）.
3. Replace the charger plug dust cap and store the charger unit in the bag
provided, in a d place（Figure 6）.
54 6
Loading ...
Loading ...
Loading ...